Rquiretmns to Hack Wi-Fi using By Wifiphisher Hacking tool ( pc )

• PC/laptop running on Kali LINUX
• Download Wifiphisher from GitHub.

Step 1: Install or Update Python

First, you have to install or update “python” in Kali LINUX. Open the terminal and type below command

apt-get install python

Step 2: Unpack Wifiphisher script

After installing python, you have to unpack the Wifiphisher.

kali > tar -xvzf /root/wifiphisher-1.1.tar.gz

Alternatively, you can clone the code from GitHub by typing:

kali > git clone https://github/sophron/wifiphisher.git

Step 3: Navigate to the directory

Navigate to the directory where Wifiphisher has been installed.To navigate type below command in terminal.

sudo
cd wifiphisher/

Now confirm the name of the script. To confirm the name of script, type

ls -l

Step 4: Run the Script “wifiphisher.py”

To run script type below commands in terminal and hit enter.

python wifiphisher.py

Once installed the first time you run the script, it will likely tell you that “hostapd” is not found and will prompt you to install it. Install by typing “y” for yes. It will then proceed to install hostapd.

When it has completed, once again, execute the Wifiphisher script.

kali > python wifiphisher.py

This time, it will start the web server on port 8080 and 443, then go about and discover the available Wi-Fi networks. Wifiphisher will get to work and list all the Wi-Fi networks it has discovered.

Step 5: Select AP and Get the Password

From the listed Wi-Fi networks, select your target AP.  To select target just press ctrl+c (to stop scanning) and type “num” of AP. After entering num hit enter. The Wifiphisher will show you the target APs SSID and Mac address. Now let the Wifiphisher do its magic and clone this SSID while jamming the real AP. Once this process is completed, the Wifiphisher will direct the original owner of the Wi-Fi network to the cloned page and ask them to re-authenticate their login credentials.

After connecting to evil twin AP, Wifiphisher serves a legitimate looking proxy 10.0.0.58 web page and display a message to the Wi-Fi owner that his/her firmware is being upgraded and they should enter their username and passphrase.

When the user enters their password, it will be passed to you through the Wifiphisher open terminal. Thus Wifiphisher does its job without cracking or even letting the Wi-Fi user know he/she has been hacked.

Baca Juga : https://www.anonytun.com/cara-setting-anonytun-videomax

LINK Wifiphisher : https://github/sophron/wifiphisher.git